
A 3 BHK house plan on a 60 ft × 29 ft plot can provide a practical layout for a family residence when the rooms, circulation, staircase, ventilation and open spaces are planned properly.
The drawing discussed in this article shows a conceptual three-bedroom residential arrangement with:
- Three bedrooms
- Living room
- Dining room
- Kitchen
- Pooja room
- Two toilets
- Staircase
- Cupboard or storage areas
- Open spaces around the building
The drawing also shows a road on the right side of the plot. The plan is a preliminary planning reference and must not be used directly for construction without site verification and professional design.
Page Contents
Basic Details of the Plot
| Description | Details |
|---|---|
| Plot length shown | 60 ft |
| Plot width shown | 29 ft |
| Approximate plot area | 1,740 sq ft |
| Main use | Single-family 3 BHK residence |
| Road location shown | Right side of the drawing |
| Staircase location shown | Right side of the plan |
The actual buildable area will be smaller than the total plot area because of walls, setbacks, open spaces, staircase requirements, parking and local building regulations.
Overview of the 3 BHK Layout
The main drawing shows three bedrooms arranged around a central living and dining area.
The upper portion of the plan includes two bedrooms and two toilets. The lower portion includes another bedroom, kitchen, pooja room and living room.
The dining room is located near the centre of the house, allowing it to connect with the living and kitchen areas. The staircase is shown on the right side, near the road-facing portion of the plot.
The arrangement is suitable for a family house, but the final entrance, parking and staircase design should be confirmed according to the actual site and local rules.
Approximate Room Sizes Shown in the Drawing
| Room | Approximate size |
|---|---|
| Bedroom 1 | 12 ft × 10 ft |
| Bedroom 2 | 12 ft × 10 ft |
| Bedroom 3 | 12 ft × 10 ft |
| Toilet 1 | 7 ft × 5 ft |
| Toilet 2 | 7 ft × 5 ft |
| Dining room | 14 ft 9 in × 9 ft |
| Kitchen | 10 ft 10 in × 6 ft |
| Pooja room | 4 ft × 6 ft |
| Living room | 12 ft × 10 ft |
The dimensions are taken from the labels shown in the drawing. They must be verified from the final architectural drawing before construction.
Bedroom Arrangement
The drawing contains three bedrooms, each marked approximately 12 ft × 10 ft.
This size may be suitable for a bed, wardrobe and basic circulation, but the final furniture arrangement should be checked before construction. Window locations, door swings, wardrobe positions and ventilation should be coordinated with the architectural plan.
One bedroom is positioned in the lower-left portion of the plan, while two bedrooms are placed toward the upper side. This arrangement separates the sleeping areas from the main entrance and living zone.
Living Room
The living room is shown in the lower-right portion of the plan and is marked approximately 12 ft × 10 ft.
The living room should have:
- Comfortable entrance access
- Adequate natural light
- Proper furniture circulation
- Clear connection with the dining area
- Suitable window and ventilation openings
The final size should be checked after considering wall thickness, columns, electrical points and furniture placement.
Dining Room
The dining room is shown near the centre of the plan and is marked approximately 14 ft 9 in × 9 ft.
A centrally located dining room may provide convenient access from the living room, kitchen and bedrooms. However, the final arrangement should ensure that dining movement does not obstruct the main entrance, staircase or toilet access.
Kitchen
The kitchen is shown in the lower central portion of the plan and is marked approximately 10 ft 10 in × 6 ft.
Before finalising the kitchen, check the following:
- Cooking platform length
- Sink position
- Refrigerator location
- Ventilation window
- Exhaust arrangement
- Water supply
- Wastewater outlet
- Electrical points
- Service access
The kitchen should be coordinated with the plumbing and drainage layout.
Pooja Room
A small pooja room measuring approximately 4 ft × 6 ft is shown beside the kitchen and living-room area.
The final location should be checked for:
- Door clearance
- Ventilation
- Electrical lighting
- Safe separation from cooking areas
- Adequate movement space
The room should not obstruct the main circulation path.
Toilets
Two toilets are shown near the upper central part of the plan, each marked approximately 7 ft × 5 ft.
The final toilet design should include:
- Proper slope towards the floor trap
- Ventilation
- Waterproofing
- Soil and waste pipe routing
- Water supply points
- Easy maintenance access
- Separation from dining and kitchen areas where required
The plumbing shafts and drainage lines should be coordinated before structural work begins.
Staircase and Road-Side Access
The staircase is shown on the right side of the plan, close to the road-facing area.
The staircase design must be checked for:
- Stair width
- Riser height
- Tread width
- Landing size
- Headroom
- Handrail
- Natural light
- Ventilation
- Safe access to upper floors
The road is shown on the right side of the drawing. The actual entrance gate, parking location and pedestrian access should be confirmed based on the site survey.
Alternative Two-Unit Rental Arrangement
The second drawing shows an alternative layout with two similar residential portions. Each portion appears to include a bedroom, living room, kitchen, toilet and utility area.
This arrangement may be suitable for rental use, but it is a different planning concept from the main 3 BHK family house plan.
The two drawings should not be combined directly. The owner should select one planning concept and obtain a fresh architectural layout based on the actual site.
Important Checks Before Construction
Verify the Site
Confirm the actual plot length, width, boundary position, road location and neighbouring structures through a proper site survey.
Confirm Building Setbacks
The open-space dimensions shown in the drawing are only preliminary indications. Confirm the required setbacks with the local authority.
Prepare Structural Drawings
The plan does not show:
- Foundation design
- Column sizes
- Beam sizes
- Slab design
- Reinforcement details
- Soil-bearing capacity
- Seismic design
A qualified structural engineer must prepare the structural drawings.
Plan Services
Prepare separate drawings for:
- Plumbing
- Drainage
- Electrical wiring
- Water storage
- Rainwater drainage
- Septic tank or sewer connection
- Ventilation
- Solar or utility services
Check Parking and Movement
Confirm whether the plot has enough space for parking, gate movement, staircase access and future maintenance.
Is This 3 BHK Plan Ready for Construction?
No. This is a conceptual residential planning drawing.
Before construction, prepare:
- Site survey
- Architectural working drawings
- Structural drawings
- Foundation design
- Plumbing layout
- Electrical layout
- Elevation and section
- Local approval drawings
- Soil investigation, where required
Related Resources
- House Construction Cost Calculator
- Essential Guide to Quantity Estimation for Residential Buildings
- Foundation in Civil Engineering
- Concrete Volume Calculator
- Civil Engineering Articles
About T Square Civil Engineering
T Square Civil Engineering provides practical civil engineering articles, construction guides, engineering calculators, laboratory-test explanations, quantity-estimation resources and IS Code-based learning materials for students, site engineers, contractors, technicians and construction professionals.
Disclaimer
The information on this website is provided for educational purposes only.
This house-plan article is a general planning reference and should not be treated as a substitute for site-specific architectural, structural or legal advice. Actual construction must be based on verified site measurements, soil conditions, approved drawings, applicable local building regulations and the recommendations of qualified architects and structural engineers.
